InsulationDM
Draws one layer of insulation, soft with its loop line or rigid with its hatch, of a thickness. It is a build-up of that one layer, so it can later be changed, flipped or exploded like one.
How it works
- Choose soft or rigid and the thickness, then click the first point of the path the insulation lies against, here the wall's outer face.
- Click the next points, and press Enter when the path is done. E instead lays it along an edge, A fills a closed area.
- Click the side the insulation goes to.
Options
Set on the command line while the tool runs; each starts with the value shown, and what you set is kept for the rest of the session.
- Insulation
- Soft
- Thickness
- 120 mm
Keys
- Type DM, then Enter
While the tool runs
- E
- Along an edge
- A
- Into an area